Modular design with strong error tolerance
One pile with multiple guns and multiple channels for simultaneous charging
Intelligent and flexible power allocation for maximum efficiency
High reliability, multi-directional safety protection
Remote control, maintenance, diagnosis
| Split 6-gun charging stack | ||
| Equipment model | JWE-D1000-480K | |
| Rated power | KW | 480(Downward compatible) |
| AC input voltage | V | AC380V ± 20%, three-phase five-wire system |
| AC power frequency | Hz | 50±5% |
| Input power factor | 20-50% load, ＞ 0.97; 50~100% load, ＞ 0.99 | |
| Rated output voltage | V | DC 200~1000 continuously adjustable |
| Output current range | A | 0~250A continuously adjustable per gun |
| Dual gun power distribution | Support power support; Charging a car with two guns | |
| Single gun output power range | KW | 0-180 Adjust output power according to BMS requirements |
| BMS auxiliary power supply | 12V/24V configurable | |
| Voltage accuracy | Not more than ± 0.5% | |
| Current accuracy | ≥ 30A: no more than ± 1% ＜ 30A: no more than ± 0.3A | |
| Voltage stabilization accuracy | Not greater than ± 0.5% | |
| Steady current accuracy | Not greater than ± 0.5% | |
| Ripple coefficient | Effective value: no more than ± 0.5% Peak value: no more than ± 1% | |
| Current sharing imbalance | ≤5% | |
| Input impulse current | A | ≤ 110% of rated input current |
| Output overshoot voltage | V | ≤ 110% steady-state output voltage |
| Productiveness | ≥95% | |
| Power Factor | ≥0.99APFC | |
| Noise | dB | ≤65 |
| Oscillating wave immunity | level 3（1MHz 和 100kHz） | |
| Protection level | IP55 outdoor all-in-one machine | |
| MTBF | ≥87600h | |
| Display | 7-inch touch screen | |
| Ambient temperature | -30℃—+75℃ | |
| Height | ＜2000m Derating over 2000m | |
| Humidity | 5%—95% | |
| Output side detection and alarm | Battery disconnection and reverse connection judgment function, pile end insulation detection function, short circuit alarm function, DC contactor adhesion detection and alarm function | |
Sales
